Hyundai Santa Fe: Specifications - Rear Parking Assist System - Body Electrical SystemHyundai Santa Fe: Specifications

Specification

Item
Specification
Ultrasonic sensor
Voltage rating
DC 12 V
Detecting range
30 cm ~ 120 cm
Operation voltage
DC 9 ~ 16 V
Operation current
MAX 300 mA
Operation temperature
-30°C ~ +80°C (-22°C ~ +176°C)
Operation frequency
48 ± 5 KHz
Number of sensors
4 (Left side, Left center, Right center, Right side)

※ Rear parking assist control unit function is built in BCM (body control unit).


Components and Components Location
Component Location 1. BCM (Body Control Module) 2. Ultrasonic sensor ※ Rear parking assist control unit function is built in BCM (body control unit). ...

See also:

ETC (Electronic Throttle Control) System. Description and Operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Accelerator ...

Repair procedures
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. 2. Remove the front door module. 3. Disconnect the connectors from the actuator. 4. Check actuator operation by connecting power ...

Automatic turn off function
The interior lights automatically turn off approximately 20 minutes after the ignition switch is turned off. If your vehicle is equipped with the theft alarm system, the interior lights automatically turn ...