Hyundai Santa Fe: Steering wheel audio control - Audio system - Features of your vehicleHyundai Santa Fe: Steering wheel audio control

The steering wheel may incorporate audio control buttons.

The steering wheel may incorporate audio control buttons.

CAUTION

Do not operate audio remote control buttons simultaneously.

MODE (1)

Press the button to change audio source.

PRESET/SEEK ((2)/(2)) (2)

The SEEK/PRESET button has different functions based on the system mode.

For the following functions the button should be pressed for 0.8 second or more.

RADIO mode

It will function as the AUTO SEEK select button.

CD/USB/iPod® mode

It will function as the FF/REW button.

If the SEEK/PRESET button is pressed for less than 0.8 second, it will work as follows in each mode.

RADIO mode

It will function as the PRESET STATION buttons.

CD/USB/iPod® mode

It will function as TRACK UP/DOWN button.

VOLUME (VOL+/-) (3)

  • Push the lever upward (+) to increase the volume.
  • Push the lever downward (-) to decrease the volume.

MUTE (4)

  • Press the button to mute the sound.
  • Press the button to turn off the microphone during a telephone call.

Detailed information for audio control buttons are described in the following pages in this section.

Antenna
Roof antenna Your vehicle uses a roof antenna to receive both AM and FM broadcast signals. CAUTION Before entering a place with a low height clearance or a car wash, remove the antenna by rotating it counterclockwise. ...

How vehicle audio works
AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then processed by the radio and sent to ...

See also:

Activating or deactivating Sport mode for Electronic Stability Control
The stability system (ESC1) is always activated and cannot be switched off. However, the driver can select Sport mode, which offers more active driving characteristics. Activate or deactivate the function ...

Transmitter. Repair procedures
Inspection 1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery (A) and check voltage if the red light doesn't flicker. Standard ...

Passive Occupant Detection System (PODS-F). Description and Operation
Description In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Passive occupant detection system (PODS-F). If the seat is occupied, PODS-F detects passenger presences status ...