Hyundai Santa Fe: SS-A Solenoid Valve(ON/OFF). Specifications
Specifications
ON/OFF Solenoid Valve(SS-A)
▷ Control type : Normal low type
|
Control pressure kpa (kgf/cm², psi) |
490.33(5.0, 71.12) |
|
Internal resistance(Ω) |
10~11 |
SS-A Solenoid Valve(ON/OFF). Description and Operation
Description SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body. ...
SS-A Solenoid Valve(ON/OFF). Schematic Diagrams
Circuit Diagram ...
See also:
4WD ECU. Schematic Diagrams
Circuit Diagram 4WD ECU Connector Pin Function 1 CAN communication line (Low) 2 CAN communication line (High) 3 - 4 Pressure sensor signal(+) 5 - 6 Lock mode switch 7 Oil pressure motor B 8 Oil pressure ...
Transmitter precautions
✽ NOTICE The transmitter will not work if any of following occur: The ignition key is in the ignition switch. You exceed the operating distance limit (about 90 feet [30 m]). The battery in the transmitter ...
Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad center panel. 3. Disconnect the body control module connectors (A). 4. Remove the body control module (A) after loosening ...
