Hyundai Santa Fe: To defrost outside windshield - Automatic climate control system - Windshield defrosting and defogging - Features of your vehicleHyundai Santa Fe: To defrost outside windshield

1. Set the temperature to the extreme hot (HI) position.

1. Set the temperature to the extreme hot (HI) position.
2. Set the fan speed to the highest (extreme right) position.
3. Press the defrost button (4. The outside (fresh) air position will be selected automatically.).
4. The outside (fresh) air position will be selected automatically.

If the fan speed is adjusted to a higher fan speed. position is selected, lower fan speed is adjusted to a higher fan speed.

To defog inside windshield
1. Select desired temperature. 2. Select desired fan speed. 3. Press the defrost button (). 4. The outside (fresh) air position will be selected automatically. If the outside (fresh) air position is not ...

Auto defogging system
Auto defogging reduces the probability of fogging up the inside of the windshield by automatically sensing the moisture of inside the windshield. The auto defogging system operates when the heater or ...

See also:

Fuel Filter. Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Release the fixing hooks, and then remove the fuel sender (A). 4. Release ...

TPMS Receiver. Schematic Diagrams
System Circuit Diagram No Function 1 MCU part 2 CAN interface part 3 5V supply part 4 Battery detection circuit part 5 RF receiver part 6 Antenna part ...

Temperature control
The temperature control switch allows you to control the temperature of the airflow in the vehicle. To change the temperature: Press the (red) switch to increase temperature. Press the (blue) switch to ...