Hyundai Santa Fe: To defog inside windshield
1. Select desired temperature.
2. Select desired fan speed.
3. Press the defrost button (
).
4. The outside (fresh) air position will be selected automatically.
If the outside (fresh) air position is not selected automatically, adjust the corresponding button manually.
If the position is selected, lower
fan speed is adjusted to a higher fan speed.
To defrost outside windshield
1. Set the temperature to the extreme hot (HI) position. 2. Set the fan speed to the highest (extreme right) position. 3. Press the defrost button (). 4. The outside (fresh) air position will be selected ...
See also:
Mode selection
The mode selection button controls the direction of the air flow through the ventilation system. The air flow outlet port is converted as follows: Refer to the illustration in the “Manual climate control ...
Fuses
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment ...
California perchlorate notice
Perchlorate Material-special handling may apply, See www.dtsc.ca.gov/hazardouswaste/ perchlorate. Notice to California Vehicle Dismantlers: Perchlorate containing materials, such as air bag inflators, ...
