Hyundai Santa Fe: Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Santa Fe: Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications

Hyundai Santa Fe DM 2013-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications

Specifications

Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa
(kgf/cm², psi)
 9.81~500.14
(0.1~5.1,1.42~72.54)
Current value(mA)
 50~850
Internal resistance(Ω)
 5.1


Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Description Torque converter control solenoid valve (T/CON) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter. ...

Torque Converter Control Solenoid Valve (T/CON_VFS). Schematic Diagrams
Circuit Diagram ...

See also:

Jack and tools
The jack, jack handle, and wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to find these equipment. (1) Jack handle (2) Jack (3) Wheel lug nut wrench (4) Socket ...

Canister Close Valve (CCV). Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specification. Specification: ...

Use high quality ethylene glycol coolant
Your vehicle is delivered with high quality ethylene glycol coolant in the cooling system. It is the only type of coolant that should be used because it helps prevent corrosion in the cooling system, lubricates ...