Hyundai Santa Fe: Trip A/B - Trip computer - Features of your vehicleHyundai Santa Fe: Trip A/B

Tripmeter (1)

Tripmeter (1)

  • The tripmeter is the total driving distance since the last tripmeter reset. - Distance range: 0.0 ~ 9999.9 mi. or km
  • To reset the tripmeter, press the SELECT/RESET button on the steering wheel for more than 1 second when the tripmeter is displayed.

Average Vehicle Speed (2)

  • The average vehicle speed is calculated by the total driving distance and driving time since the last average vehicle speed reset.
    - Speed range: 0 ~ 999 MPH or km/h
  • To reset the average vehicle speed, press the SELECT/RESET button than 1 second when the average vehicle speed is displayed. on the steering wheel for more than 1 second when the average vehicle speed is displayed.

✽ NOTICE

  • The average vehicle speed is not displayed if the driving distance is less than 0.03 miles (50 meters) or the driving time is less than 10 seconds since the ignition switch or Engine Start/Stop button is turned to ON.
  • Even if the vehicle is not in motion, the average vehicle speed keeps going while the engine is running.

Elapsed Time (3)

  • The elapsed time is the total driving time since the last elapsed time reset.
    - Time range (hh:mm): 00:00 ~ 99:59
  • To reset the elapsed time, press the SELECT/RESET button on the steering wheel for more than 1 second when the elapsed time is displayed.

✽ NOTICE

Even if the vehicle is not in motion, the elapsed time keeps going while the engine is running.

Overview
Description The trip computer is a microcomputer- controlled driver information system that displays information related to driving. ✽ NOTICE Some driving information stored in the trip computer ...

Fuel Economy
Distance To Empty (1) The distance to empty is the estimated distance the vehicle can be driven with the remaining fuel. - Distance range : 30 ~ 9999 mi or 50 ~ 9999 km. If the estimated distance is below ...

See also:

Components and Components Location
Component Location 1. BCM (Body Control Module) 2. Ultrasonic sensor ※ Rear parking assist control unit function is built in BCM (body control unit). ...

Specifications
Specifications Smart Key Unit Items Specification Rated voltage DC 12V Operating voltage DC 9 ~ 16V Operating temperature -22°F ~ 167°F (-30°C ~ 75°C) Load Max. 2.9mA (When welcome light function off) ...

Fuel Pump Motor. Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Release the fixing hooks, and then remove the fuel sender (A). 4. Release ...