Hyundai Santa Fe: ETC (Electronic Throttle Control) System. Schematic Diagrams - Engine Control System - Engine Control/Fuel SystemHyundai Santa Fe: ETC (Electronic Throttle Control) System. Schematic Diagrams

Circuit Diagram


ETC (Electronic Throttle Control) System. Specifications
Specification [Throttle Position Sensor (TPS)] Throttle Angle(В°) Output Voltage(V) TPS1 TPS2 0 0.0 5.0 10 0.48 4.52 20 0.95 4.05 30 1.43 3.57 40 1.90 3.10 50 2.38 2.62 60 2.86 2.14 70 3.33 1.67 80 3.81 ...

ETC (Electronic Throttle Control) System. Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification: Refer ...

See also:

Engine Oil Pressure Warning Light
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It remains on until the engine is started. When the engine oil pressure is low. If the ...

CVVT & Camshaft. Repair procedures
Removal 1. Remove the cylinder head cover. 2. Set No.1 cylinder to TDC/compression. A. Turn the crankshaft pulley and align its groove with the timing mark "T" of the lower timing chain cover. ...

Air intake control
This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position The indicator light on the ...