Hyundai Santa Fe: Front Seat Belt - Body (Interior and Exterior)Hyundai Santa Fe: Front Seat Belt

Rear Seat Frame Assembly. Repair procedures
Replacement [Second row seat assembly] (LH) • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related ...

Components and Components Location
Components 1. Front seat belt pretensioner / EFD system 2. Height adjuster 3. Second row seat belt 4. Third row seat belt ...

See also:

Pressure Sensor. Description and Operation
Description The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque ...

High Mounted Stop Lamp. Repair procedures
Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear spoiler. 3. Remove the high mounted stop lamp assembly (A) after loosening screws (4EA). Installation ...

To resume cruising speed at more than approximately 25 mph (40 km/h)
If any method other than the CRUISE button was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when you move the lever up (to RES+). ...