Hyundai Santa Fe: Heated Oxygen Sensor (HO2S). Specifications - Engine Control System - Engine Control/Fuel SystemHyundai Santa Fe: Heated Oxygen Sensor (HO2S). Specifications

Specification

HO2S [Bank 1/Sensor 1]
Item
Specification
Heater Resistance (Ω)
2.5 ~ 4.0 [20°C(68°F)]

HO2S [Bank 1/Sensor 2]
A/F Ratio (λ)
Output Voltage(V)
RICH
Approx. 0.9
LEAN
Approx. 0.04

Item
Specification
Heater Resistance (Ω)
3.3 ~ 4.1Ω[21°C(69.8°F)]


Heated Oxygen Sensor (HO2S). Description and Operation
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance ...

See also:

Rear Door Inside Handle. Repair procedures
Replacement 1. Remove the rear door trim. 2. After loosening the mounting screws, then remove the rear door inside handle (A). 3. Install in the reverse order of removal. • Make sure the door locks/unlocks ...

Fuel Pressure Control Valve. Description and Operation
Description Fuel Pressure Control Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine ...

Electric power steering (EPS)
The power steering uses a motor to assist you in steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be steered, but it will require increased ...