Hyundai Santa Fe: Interior Trim
Front Wheel Speed Sensor. Repair procedures To decrease the cruising speed Flex steer
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
Roof Trim Assembly. Repair procedures
Components 1. Front pillar trim 2. Center pillar lower trim 3. Center pillar upper trim 4. Rear pillar trim 5. Cowl side trim 6. Front door scuff trim 7. Rear door scuff trim 8.Front door step trim 9. ...
Components and Components LocationSee also:
Removal 1. Remove the front wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the front wheel speed sensor mounting bolt (A). Tightening torque: 6.9 ~ ...
Follow either of these procedures: Move the lever down (to SET-) and hold it. Your vehicle will gradually slow down. Release the lever at the speed you want to maintain. Move the lever down (to SET-) ...
The FLEX STEER controls steering effort as driver's preference or road condition. You can select the desired steering mode by pressing the FLEX STEER button. Type A Type B When the steering mode button ...
