Hyundai Santa Fe: Rear Bumper
Specifications Pressure Sensor. Repair procedures Inside Rear View Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
Radiator Grill. Repair procedures
Components 1. Rear bumper cover 2. Rear bumper beam assembly 3. Rear bumper beam cover 4. Rear bumper side bracket [LH] 5. Rear bumper side bracket [RH] 6. Rear bumper lower side bracket ...
Components and Components LocationSee also:
Specifications Item Specification Master cylinder • Type • I.D. mm(in) • Piston stroke mm(in) • Fluid level switch Fixed type 22.22 mm (0.875 in) 45 ± 1 mm (1.77 ± 0.039 in) Provided ...
Inspection If you have trouble code related to the pressure sensor check pressure sensor according to the inspection process. Pressure Sensor Inspection Procedure Measure the resistance of pressure sensor ...
Replacement [Manual Mirror] • Put on gloves to protect your hands. 1. Loosen the inside rear view mirror mounting screw (C). 2. Push the inside rear view mirror base (B) up to remove the inside rear ...
