Hyundai Santa Fe: Valve Body. Description and Operation - Hydraulic System - Automatic Transaxle SystemHyundai Santa Fe: Valve Body. Description and Operation

Description

The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves, and manual valves. The body also features electronic solenoid valves that ensure smooth gear changes.


Fluid. Repair procedures
Service Adjustment Procedure Oil level Check A check of ATF level is not normally required during scheduled services. If an oil leak is found, perform the oil level check procedure after replairs are completed. ...

Valve Body. Components and Components Location
Component Location 1. Automatic transaxle 2. Valve body assembly 1. Pressure Control Valve(PCV) adjust screw 2. Solenoid valve bracket 3. Oil temperature sensor 4. Line Pressure Control Solenoid Valve ...

See also:

Starter. Components and Components Location
Components 1. Front housing 2. Starter solenoid assembly 3. Lever 4. Lever packing 5. Planet shaft assembly 6. Planetary gear assembly 7. Packing 8. Shield 9. Amature assembly 10. Brush holder assembly ...

Seat Belt Buckle Switch (BS). Description and Operation
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The ...

Driving on grades
Reduce speed and shift to a lower gear before you start down a long or steep downgrade. If you don’t shift down, you might have to use your brakes so much that they would get hot and no longer operate ...