Hyundai Santa Fe: Components and Components Location
Component Location
|
1. DDM (Driver door module) 2. ADM (Assistant door module) 3. Front window motor |
4. Rear window motor 5. Rear window switch |
Power Windows
...
Description and Operation
Function Of Safety Power Window When driver door power window auto-up switch is operated, safety function is activated. 1. Safety function condition When detect the force of 100N (using the 10N/mm spring) ...
See also:
Curtain Airbag (CAB) Module. Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim. 3. Disconnect the curtain airbag harness connector (A). 4. After loosening ...
Rear Combination Lamp. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Loose the screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination lamp (B). ...
Closing the hood
1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the engine compartment. ...
