Hyundai Santa Fe: Power Windows
Fuel Filler Cap. Description and Operation Recommended cold tire inflation pressures Front Impact Sensor (FIS). Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (B) after removing the front door quadrant cover (A). 3. Disconnect the power door mirror connector (A) from the ...
Power Door Mirror Actuator. Repair
procedures
Component Location 1. DDM (Driver door module) 2. ADM (Assistant door module) 3. Front window motor 4. Rear window motor 5. Rear window switch ...
Components and Components LocationSee also:
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap and the ...
All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than 1 mile (1.6 km). ...
Removal • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connector, disconnect the front airbag ...
