Hyundai Santa Fe (DM): Flex Steer. Description and Operation - Steering wheel - Steering SystemHyundai Santa Fe (DM): Flex Steer. Description and Operation

Instruction

Flex Steer is system to choose the three modes power steering depending on driver preference or driving conditions.
Display on the cluster but power steering is would not changed while operating the steering wheel.
As a safety measures, mode is changed automatically when steering wheel operation is done.
Be sure to carefully change the mode while driving.
Electronic Power Steering (MDPS) is not working due to the failure, "flex steer" is may not work.
How to operate
First input : Display the current mode on cluster. (4 seconds)
Add input (4 seconds) : Mode is changed sequentially.

Three steering modes
COMRORT : For the elder and the female drivers: it is mainly used for city driving and stop & parking, and a little lighter power steering.
NORMAL : Basic mode
SPORT : It is mainly used for highway driving, and a little heavy power steering.

Flex Steer. Components and Components Location
Components Location 1. Flex steer switch ...

Flex Steer. Schematic Diagrams
Circuit Diagram ...

See also:

Rear Hub - Carrier. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...

Repair procedures
Fuel Pressure Test 1. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”) When removing the fuel pump relay, a Diagnostic Trouble ...

Hazard Lamp Switch. Repair procedures
Inspection 1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of hazard lamp switch ...