Hyundai Santa Fe: Flex Steer. Components and Components Location - Steering wheel - Steering SystemHyundai Santa Fe: Flex Steer. Components and Components Location

Hyundai Santa Fe DM 2013-2018 Service Manual / Steering System / Steering wheel / Flex Steer. Components and Components Location

Components Location

1. Flex steer switch


Heated Repair procedures
Inpection 1. Measure a resistance of NTC and Heated pad. A. NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C) B. Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω ± 10% 2. Measure ...

Flex Steer. Description and Operation
Instruction Flex Steer is system to choose the three modes power steering depending on driver preference or driving conditions. • Display on the cluster but power steering is would not changed while ...

See also:

Relay Box (Engine Compartment). Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay box. Power Relay (Type A) Check for continuity between the terminals. A : Power outlet ...

Side Sill Molding. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Climate control air filter
The climate control air filter installed behind the glove box filters the dust or other pollutants that come into the vehicle from the outside through the heating and air conditioning system. If dust ...