Hyundai Santa Fe: Fuse switch
Always, put the mode switch at the ON position.
If you move the switch to the OFF position, some items such as audio and digital clock must be reset and transmitter (or smart key) may not work properly.
CAUTION
Always place the fuse switch in the ON position while driving the vehicle.
Inner panel fuse replacement
1. Turn the ignition switch and all other switches off. 2. Open the fuse panel cover. 3. Pull the suspected fuse straight out. Use the removal tool provided in the engine compartment fuse panel. 4. Check ...
Engine compartment panel fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse box cover by pressing the tab and pulling up. 3. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, ...
See also:
Front Wheel Repair procedures
Removal 1. Remove the driveshaft and axle. 2. Remove the propeller shaft (A). Tightening torque : 49.0~68.6N.m (5.0~7.0kgf.m, 36.2~50.6lb-ft) 3. Loosen the transfer upper & lower mounting bolts. (transfer ...
Front Door Outside Handle. Repair procedures
Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the front door outside handle cover (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) ...
Special Service Tools
Special Service Tools Tool (Number and name) Illustration Use 09861-31100 Sealany cut-out tool Cutting windshield sealant (use with 09861-31200) 09861-31200 Sealant cutting blade Cutting windshield sealant ...
