Hyundai Santa Fe: Horn
To sound the horn, press the area indicated by the horn symbol on your steering wheel (see illustration). The horn will operate only when this area is pressed.
Check the horn regularly to be sure it operates properly.
CAUTION
- Do not strike the horn severely to operate it, or hit it with your fist. Do not press on the horn with a sharp-pointed object.
- When cleaning the steering wheel, do not use an organic solvent such as thinner, benzene, alcohole and gasoline. Doing so may damage the steering wheel.
Heated steering wheel
With the ignition switch in the ON position, pressing the heated steering wheel button warms the steering wheel. The indicator on the button will illuminate and notify you on the LCD display. To turn ...
Flex steer
The FLEX STEER controls steering effort as driver's preference or road condition. You can select the desired steering mode by pressing the FLEX STEER button. Type A Type B When the steering mode button ...
See also:
BJ Boot. Repair procedures
Removal 1. Remove the front driveshaft. 2. Remove the TJ joint assembly. 3. Remove the Dynamic damper. 4. Using a plier or flat-tipped (-) screwdriver, remove the BJ boot bands (A). 5. Remove the BJ boot. ...
Air intake control
This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position The indicator light on the ...
Heated Repair procedures
Inpection 1. Measure a resistance of NTC and Heated pad. A. NTC resistance(Black / Yellow, Black) - 10.0 kΩ Â± 10% (25°C) B. Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω Â± 10% 2. Measure ...
