Hyundai Santa Fe: Steering wheel
Troubleshooting Malfunction Indicator Lamp (MIL) Accelerator Position Sensor (APS). Description and Operation
Whenever the vehicle battery is disconnected or discharged, you must reset your sunroof system as follows: 1.Turn the ignition switch to the ON position. 2.Close the sunshade and sunroof completely if ...
Resetting the sunroof
The power steering uses a motor to assist you in steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be steered, but it will require increased ...
Electric power steering (EPS)See also:
Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The measured resistance at high temperature ...
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It remains on until the engine is started. When there is a malfunction with the emission ...
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...
