Hyundai Santa Fe: Power Door Mirrors
Non-operational conditions of rear parking assist system Shift Cable. Repair procedures Tail Gate Trim. Components and Components Location
Diagnosis With GDS 1. The BCM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of power ...
Power Door Lock Switch. Repair
procedures
Component Location 1. Power door mirror 2. Power door mirror switch 3. Power folding mirror switch ...
Components and Components LocationSee also:
The rear parking assist system may not operate properly when: 1. Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared.) 2. The sensor is covered with foreign matter, ...
Removal 1. Remove the floor console. 2. Remove the air duct. 3. Disconnect the shift cable (A). 4. Remove the retainer (A) and nut (B). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8~8.7 lb-ft) ...
Component Location 1. Tail gate trim ...
