Hyundai Santa Fe: Seat cushion height (for driver’s seat) - Front seat adjustment - Manual - Seats - Safety features of your vehicleHyundai Santa Fe: Seat cushion height (for driver’s seat)

To change the height of the seat cushion, push the lever upwards or downwards.

To change the height of the seat cushion, push the lever upwards or downwards.

  • To lower the seat cushion, push the lever down several times.
  • To raise the seat cushion, pull the lever up several times.
Seatback angle
To recline the seatback: 1. Lean forward slightly and lift up the seatback recline lever. 2. Carefully lean back on the seat and adjust the seatback of the seat to the position you desire. 3. Release ...

Lumbar support (for driver’s seat)
1. Press the front portion of the switch to increase support or the rear portion of the switch to decrease support. 2. Release the switch once it reaches the desired position. ...

See also:

Hood Seal Weatherstrip. Repair procedures
Replacement 1. Detach the clips, then remove the hood seal weatherstrip (A). • Be careful not to scratch the hood seal weatherstrip. 2. Install in the reverse order of removal. • Replace any damaged ...

Idler. Repair procedures
Removal and Installation 1. Remove the drive belt. 2. Remove the idler(A). Tightening torque : 53.9 ~ 63.7 N.m (5.5 ~ 6.5 kgf.m, 39.8 ~ 47.0 lb-ft) Check the idler. if it is grease leak or abnormal rotation, ...

Changing a tire with TPMS
If you have a flat tire, the Low Tire Pressure indicator will come on. Have the flat tire repaired by an authorized HYUNDAI dealer as soon as possible or replace the flat tire with the spare tire. CAUTION ...