Hyundai Santa Fe: Specifications
Specifications
| Tightening Torques |
|
Items |
N.m |
Kgf.m |
lb-ft |
|
Transfer assembly mounting bolts |
60.8~65.7 |
6.2~6.7 |
44.8~48.5 |
|
4WD ECM mounting nuts |
9.8~11.8 |
1.0~1.2 |
7.2~8.7 |
|
Coupling assembly mounting bolts |
56.9~64.7 |
5.8~6.6 |
42.0~47.7 |
|
Propeller shaft mounting bolts |
49.0~68.6 |
5.0~7.0 |
36.2~50.6 |
|
Transfer oil drain plug |
39.2~58.8 |
4.0~6.0 |
28.9~43.4 |
|
Transfer oil filler plug |
39.2~58.8 |
4.0~6.0 |
28.9~43.4 |
Lubricants
|
Items |
Specification |
Capacity |
|
Transfer oil |
Hypoid gear oil API GL-5, SAE 75W/90 (SHELL SPIRAX X or equivalent) |
0.6 L(0.16 U.S.gal., 0.63 U.S.qt, 0.53 Imp.qt.) |
|
Transfer spline |
TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT |
As required |
|
Coupling oil |
SHELL TF0870 |
0.485 L (0.13 U.S.gal.,0.51U.S.qt,0.43Imp.qt.) |
Special Service Tools
Special Service Tools Tools (Number and name) Illustration Use 09431-45100 Oil seal installer Installation of transfer case oil seal. (Right side) 09473-3B100 Oil seal installer Installation of transfer ...
See also:
Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels aligned ...
Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly. WARNING Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P(Park) position, ...
Fluid. Components and Components Location
Component Location 1. ATF Injection hole(eyebolt) 2. Oil level plug 3. Oil drain plug ...
