Hyundai Santa Fe: Specifications - General Information - RestraintHyundai Santa Fe: Specifications

Tightening Torques

Item
N.m
kgf.m
lb-ft
Passenger airbag(PAB)
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7
Curtain airbag (CAB)
Bolt
7.8 ~ 10.8
0.8 ~ 1.2
5.8 ~ 8.7
Nut
3.9 ~ 5.9
0.4 ~ 0.6
2.9 ~ 4.3
Knee airbag (KAB)
7.8 ~ 11.8
0.8 ~ 1.2
5.8 ~ 8.7
Seat Belt Anchor Bolt
39.2 ~ 53.9
4.0 ~ 5.5
28.9 ~ 39.8
SRSCM
7.8 ~ 9.8
0.8 ~ 1.0
5.8 ~ 7.2
Front Impact Sensor (FIS)
6.8 ~ 9.2
0.7 ~ 0.94
5.0 ~ 6.8
Rear Side Impact Sensor (SIS)
6.8 ~ 9.2
0.7 ~ 0.94
5.0 ~ 6.8
Pressure side lmpact sensor (P-SIS)
3.9 ~ 5.9
0.4 ~ 0.6
2.9 ~ 4.3


General Information
General The supplemental restraint system (SRS) is designed to supplement the seat belt to help reduce the risk or severity of injury to the driver and passenger by activating and deploying the driver, ...

Special Service Tools
Special Service Tools Tool(Number and Name) Illustration Use Deployment tool 0957A-34100A Airbag deployment tool. Deployment adapter 0957A-3F100 Use with deployment tool. (KAB) Deployment adapter 0957A-2W100 ...

See also:

Schematic Diagrams
Schematic Diagrams MDPS Circuit Diagram Harness Connector Connector Pin no Pin name Battery 1 Battery + 2 Battery - Vehicle signal 1 Igntion 2 - 3 - 4 - 5 - 6 - 7 CAN_High 8 CAN_Low ...

Hood Latch. Repair procedures
Replacement [Hood upper latch assembly] 1. After loosening the mounting bolts, then remove the hood upper latch assembly (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 2. Install ...

Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly. WARNING Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P(Park) position, ...