Hyundai Santa Fe: Restraint
Crach Pad Center Panel. Components and Components Location Rear Oil Seal. Repair procedures Knee Airbag (KAB) Module. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) • Be careful not to damage to the hub bolts when removing the ...
Steering Gear box. Repair proceduresSee also:
Component Location 1. Crash pad center lower panel ...
Removal 1. Remove the automatic transaxle. 2. Remove the drive plate. 3. Rmove the rear oil sela(A). Installation 1. Install rear oil seal. (1) Apply engine oil to a new oil seal lip. (2) Using SST(09231-H1100, ...
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the crash pad lower panel. 3. After loosening the mounting nuts and then remove the ...
