Hyundai Santa Fe: Tires and wheels
Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle.
- Recommended cold tire inflation pressures
- Checking tire inflation pressure
- Tire rotation
- Wheel alignment and tire balance
- Tire replacement
- Wheel replacement
- Tire traction
- Tire maintenance
- Tire sidewall labeling
- Radial-ply tires
Reset items
Items should be reset after the battery has been discharged or the battery has been disconnected. Auto up/down window (See section 4) Sunroof (See section 4) Trip computer (See section 4) Climate control ...
Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than 1 mile (1.6 km). ...
See also:
BJ Boot. Components and Components Location
Components 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Retainer ring 12. TJ housing 13. ...
Drive Belt. Repair procedures
Removal and Installation 1. For release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A). 2. Install the drive belt (A). Rotate the drive belt tensioner arm (A) ...
Power Door Lock Actuators. Repair
procedures
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. 2. Remove the front door module. 3. Disconnect the connectors from the actuator. 4. Check actuator operation by connecting power ...
