Hyundai Santa Fe (DM): Transaxle Control Module (TCM). Description and Operation - Automatic Transaxle Control System - Automatic Transaxle SystemHyundai Santa Fe (DM): Transaxle Control Module (TCM). Description and Operation

Description

Transaxle Control Module (TCM) is the automatic transaxle's brain. The module receives and processes signals from various sensors and implements a wide range of transaxle controls to ensure optimal driving conditions for the driver. TCM is programmed for optimal response to any on-road situation. In the event of a transaxle failure or malfunction, TCM stores the fault information in memory so that the technician may reference the code and quickly repair the transaxle.
Functions
Monitors the vehicle's operating conditions to determine the optimal gear setting.
Performs a gear change if the current gear setting differs from the identified optimal gear setting.
Determines the need for damper clutch (D/C) activation and engages the clutch accordingly.
Calculates the optimal line pressure level by constantly monitoring the torque level and adjusts the pressure accordingly.
Diagnoses the automatic transaxle for faults and failures.

Доставка цветов в Анна магазины цветов dostavka-byketov.ru.
Schematic Diagrams
Circuit Diagram ...

Transaxle Control Module (TCM). Schematic Diagrams
1. TCM connector and terminal function 2. TCM Terminal Function Connector [A] Pin Description Pin Description 1 ㅡ 54 ㅡ 2 Line pressure control solenoid valve (LINE_VFS) 55 ㅡ 3 Torque ...

See also:

Tail Gate Latch. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Rear Wheel Speed Sensor. Repair procedures
Removal 4WD only 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the rear wheel speed sensor mounting bolt (A). Tightening torque: ...

Outside lamp
1. Open the tailgate. 2. Remove the service cover using a flat-blade screwdriver. 3. Loosen the lamp assembly retaining please verify. 4. Remove the rear combination lamp assembly from the body of the ...