Hyundai Santa Fe: Air Ventilation Seat. Description 
and Operation - Seat Electrical - Body Electrical SystemHyundai Santa Fe: Air Ventilation Seat. Description and Operation

Description

The ventilated seat system uses a Push method to cool the seat. A blower mounted in the seat generates the cool air, which then travels through ducts to the seat back and cushion.


Air Ventilation Seat. Repair procedures
Removal Cushion Blower 1. Remove the front seat assembly. 2. Remove the cushion blower(A) after loosening the screws(4EA) and disconnecting the connector. Back Blower 1. Remove the front seat assembly. ...

See also:

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Vehicle ...

If engine stalls while driving
1. Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place. 2. Turn on your emergency flashers. 3. Try to start the engine again. If your vehicle will not start, ...

Transaxle Oil Temperature Sensor. Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...