Hyundai Santa Fe: Air Ventilation Seat. Repair procedures
Removal
| 1. |
Remove the front seat assembly.
|
| 2. |
Remove the cushion blower(A) after loosening the
screws(4EA) and disconnecting the connector.
|
| 1. |
Remove the front seat assembly.
|
| 2. |
Remove the front seat back cover.
|
| 3. |
Remove the back blower (A) after loosening the screws
(2EA) and disconnecting the connector.
|
| 1. |
Remove the front seat assembly.
|
| 2. |
Remove the air ventilation unit (A) after loosening
the screws (2EA) and disconnecting the connector.
|
Installation
| 1. |
Install the cushion blower.
|
| 2. |
Install the front seat assembly.
|
| 1. |
Install the back blower.
|
| 2. |
Install the front seat back cover.
|
| 3. |
Install the front seat assembly.
|
| 1. |
Install the air ventilation unit.
|
| 2. |
Install the front seat assembly.
|
Air Ventilation Seat. Description
and Operation
Description The ventilated seat system uses a Push method to cool the seat. A blower mounted in the seat generates the cool air, which then travels through ducts to the seat back and cushion. ...
Fuel Filler Door
...
See also:
Torque Converter Control Solenoid Valve (T/CON_VFS). Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...
Description and Operation
Description Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to control the ...
Front Strut Assembly. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...
