Hyundai Santa Fe: Auto Head Lamp Leveling Device
Turn Signal Indicator Light Rear Door Belt Outside Weatherstrip. Repair procedures Driver Airbag (DAB) Module and Clock Spring. Repair procedures
Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's ...
Auto Light Sensor. Repair procedures
Component Location 1. Head lamp leveling unit and sensor 2. Head lamp leveling actuator ...
Components and Components
LocationSee also:
This indicator light blinks: • When you turn the turn signal light on. If any of the following occurs, there may be a malfunction with the turn signal system. In this case, have your vehicle inspected ...
Replacement 1. Pull down rear door window glass by pressing the power window glass switch. 2. After loosening the mounting screws, then remove the rear door belt outside weatherstrip (A). 3. Install in ...
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the driver airbag module by putting in a flat tool (Ø5mm) into the guide hole ...
