Hyundai Santa Fe: Back View Camera System - Body Electrical SystemHyundai Santa Fe: Back View Camera System

Repair procedures
Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3. If continuity is not specified, ...

Components and Components Location
Component Location 1. Back view camera 2. ECM mirror 3. AVN head unit ...

See also:

Seat Belt Buckle Switch (BS). Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. 3. Loosen the seat belt buckle mounting bolt and remove the ...

Wheel bolts
The wheel bolts hold the wheel in place on the wheel hub. Only use rims that have been tested and approved by Volvo and are included in Volvo's original product range. Use a torque wrench to check that ...

Heated Oxygen Sensor (HO2S). Description and Operation
Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance ...