Hyundai Santa Fe: Components and Components Location
Component Location
|
1. Horn switch 2. Horn relay (Engine room compartment) 3. Horn (Low pitch/Disk type) 3*. Horn (Low pitch/Shell type) |
4. Horn (High pitch/Disk type) 4*. Horn (High pitch/Shell type) 5. Clock spring |
Horn
...
Repair procedures
Removal 1. Remove the front bumper cover. 2. Remove the bolts and disconnect the horn connectors, then remove the high pitch horn (A) and low pitch horn (B). [Disk type] [Shell type] Installation 1. Install ...
See also:
Repair procedures
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. 2. Remove the front door module. 3. Disconnect the connectors from the actuator. 4. Check actuator operation by connecting power ...
Alternator. Schematic Diagrams
Circuit Diagram ...
Programming
To train most devices, follow these instructions: 1. For first-time programming, press and hold the two outside buttons ( , ), HomeLink® Channel 1 and Channel 3, until the indicator light begins to flash ...
