Hyundai Santa Fe: Air Cleaner. Repair procedures - Intake And Exhaust System - Engine Mechanical SystemHyundai Santa Fe: Air Cleaner. Repair procedures

Removal and Installation

1.
Remove the engine cover.
2.
Remove the air duct(A).

3.
Remove the battery.
4.
Remove the air cleaner assembly.
(1)
Disconnect the breather hose (A), the intensifier hose (B).
(2)
Disconnect the air intake hose (C) and then remove the air cleaner assembly (D).

5.
Install in the reverse order of removal.

Air Cleaner. Components and Components Location
Components 1. Air duct 2. Air cleaner body 3. Air cleaner element 4. Air cleaner cover 5. Air intake hose 6. Clamp ...

Intake Manifold. Components and Components Location
Components 1. Intake manifold assembly 2. Electronic throttle body 3. Intake manifold stay 4. Intake manifold gasket ...

See also:

Headlamp, Front position lamp, Front turn signal lamp, Front fog lamp bulb replacement
(1) Headlamp (High) (2) Headlamp (Low) (3) Front position lamp (4) Front turn signal lamp/Front side marker (5) Front fog lamp (if equipped) ...

Battery. Repair procedures
Removal 1. Disconnect the battery (-) terminal and (+) terminal (A). 2. Remove the battery mounting bracket (B) and the insulation pad and then remove the battery (C). 3. Remove the air cleaner. <a ...

Propeller Shaft. Repair procedures
Removal 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A). Tightening torque: 49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6lb-ft) 2. Remove ...