Hyundai Santa Fe: Console Armrest. Repair procedures - Floor Console - Body (Interior and Exterior)Hyundai Santa Fe: Console Armrest. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
After loosening the mounting screws, then remove the console armrest cover (A).

2.
After loosening the mounting screws, then remove the console armrest (A).

3.
Install in the reverse order of removal.
•
Replace any damaged clips.

Console Armrest. Components and Components Location
Component Location 1. Console armrest ...

Crash Pad
...

See also:

Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. To reduce the possibility ...

Illuminated ignition switch
Whenever a front door is opened, the ignition switch will be illuminated for your convenience, provided the ignition switch is not in the ON position. The light will go off immediately when the ignition ...

Checking the engine oil level
Type A Type B 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for ...