Hyundai Santa Fe (DM): Crash Pad
- Components and Components Location
- Cluster Fascia Panel. Components and Components Location
- Cluster Fascia Panel. Repair procedures
- Crash Pad Lower Panel. Components and Components Location
- Crash Pad Lower Panel. Repair procedures
- Glove Box Housing. Components and Components Location
- Glove Box Housing. Repair procedures
- Steering Column Shroud Panel. Components and Components Location
- Steering Column Shroud Panel. Repair procedures
- Crash Pad Side Cover. Components and Components Location
- Crash Pad Side Cover. Repair procedures
- Crash Pad Under Cover. Repair procedures
- Crach Pad Center Panel. Components and Components Location
- Crach Pad Center Panel. Repair procedures
- Main Crash Pad Assembly. Components and Components Location
- Main Crash Pad Assembly. Repair procedures
- Cowl Cross Bar Assembly. Components and Components Location
- Cowl Cross Bar Assembly. Repair procedures
Console Armrest. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...Components and Components Location
Components (1) 1. Main crash pad assembly 2. Crash pad side cover [LH] 3. Crash pad side cover [RH] 4. Steering column shroud lower panel 5. Crash pad lower panel 6. Fuse box cover 7. Crash pad under cover ...See also:
Tail Gate Lift. Repair procedures
Replacement • Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open. 1. Using a screwdriver (A), lift up ...
Manifold Absolute Pressure Sensor (MAPS). Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional ...
Front Door Belt Inside Weatherstrip. Repair procedures
Replacement 1. Remove the front door trim. 2. Remove the front door belt inside weatherstrip (A). 3. Install in the reverse order of removal. • Replace any damaged clips. ...