Hyundai Santa Fe: Floor Console
Auto Head Lamp Leveling
Unit. Schematic Diagrams Water Temperature Control Assembly. Components and Components
Location Repair procedures
Replacement 1. Remove the cap (A) and remove the nuts, then remove the wiper arm (B). Tightening torque : 22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft) 2. Detach the clips, then remove the fender ...
Repair procedures
Components [M/T] 1. Front console garnish [LH] 2. Front console garnish [RH] 3. Console upper cover 4. Ash tray 5. Console rear complete assembly 6. Console front complete assembly 7. Console side cover ...
Components and Components LocationSee also:
Circuit Diagram ...
Components 1. O-ring 2. Water temperature control assembly 3. Water inlet fitting 4. Engine coolant temperature sensor 5. Thermostat 6. Thermostat gasket 7. Oil cooler coolant hose ...
Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cover the forward facing sensor. 3. Head a light to the ...
