Hyundai Santa Fe (DM): Cooling Fan. Specifications - Cooling System - Engine Mechanical SystemHyundai Santa Fe (DM): Cooling Fan. Specifications

Specification

Fuction
Specification
Maximum Drive Capability
250 W
21.0 + 10% A
Input
Signal Frequency
300 ± 5%
Duty
10, 30 ~ 90 %
Voltage level
HI
0.7 V above
LOW
0 ~ 1.9 V


Cooling Fan. Description and Operation
Description Control the cooling motor voltage in according to the duty(300Hz) of ECM. [ECU → PWM Input Signal(SI : 300Hz)] SI Duty Motor Voltage (V)   10% 0 ─ 30% 4.1 ± 0.65 60% 8.2 ...

Cooling Fan. Schematic Diagrams
Circuit Diagram PWM Circuti Diagram ...

See also:

Accelerator Position Sensor (APS). Description and Operation
Description Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...

Engine Control Module (ECM). Repair procedures
Removal When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used ECM] 1) Perform "ECM Neutral mode" procedure with ...

Alternator. Schematic Diagrams
Circuit Diagram ...