Hyundai Santa Fe: Differential Carrier Assembly - Driveshaft and axleHyundai Santa Fe: Differential Carrier Assembly

Propeller Shaft. Repair procedures
Removal 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A). Tightening torque: 49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6lb-ft) 2. Remove ...

Rear Differential Carrier. Components and Components Location
Component 1. Rear Differential Carrier 2. Coupling Assembly ...

See also:

Components and Components Location
Component Location 1. Fuel filler door open switch 2. Fuel filler door release actuator ...

TJ Joint. Repair procedures
Removal • Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease. • The boot band should be replaced with a new one. 1. Remove the Front Driveshaft. 2. ...

Components and Components Location
Component Location 1. Automatic transaxle 2. Inhibitor switch 3. Transaxle Control Module (TCM) 4. Valve body cover 5. Solenoid valve connect 6. Oil temperature sensor 7. Valve body assembly 8. Line Pressure ...