Hyundai Santa Fe: Downhill Brake Control (DBC) Indicator Light
This warning light illuminates:
- Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It illuminates for approximately 3 seconds and then goes off. - When you activate the DBC system by pressing the DBC button.
This warning light blinks:
• When the DBC is operating.
This warning light illuminates yellow:
• When there is a malfunction with the DBC system.
In this case, we recommend that you have the vehicle inspected by an authorized HYUNDAI dealer.
For more details, refer to “Downhill Brake Control (DBC) System” in chapter 5.
Cruise SET Indicator Light
This indicator light illuminates: • When the cruise control speed is set. For more details, refer to “Cruise Control System” in section 5. ...
Rear parking assist system
The rear parking assist system assists the driver during backward movement of the vehicle by chiming if any object is sensed within a distance of 47 in. (120 cm) behind the vehicle. This system is a supplemental ...
See also:
ETC (Electronic Throttle Control) System. Specifications
Specification [Throttle Position Sensor (TPS)] Throttle Angle(°) Output Voltage(V) TPS1 TPS2 0 0.0 5.0 10 0.48 4.52 20 0.95 4.05 30 1.43 3.57 40 1.90 3.10 50 2.38 2.62 60 2.86 2.14 70 3.33 1.67 80 3.81 ...
Heated Schematic Diagrams
System Circuit Diagram Terminal Function Housing Pin Function Wire color Pad A GND Back B HEATER Yellow C NTC+ Back / Yellow D NTC- Back Remote control A GND Back B BAT Red C LED Green D SWITCH White ...
Front Impact Sensor (FIS). Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of ...
