Hyundai Santa Fe: Indicator Lights
Drive Belt. Repair procedures High mounted stop lamp replacement Hood Assembly. Repair procedures
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When there is a malfunction ...
All Wheel Drive (AWD) Warning Light
This indicator light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When there is a malfunction ...
Electronic Stability Control (ESC) Indicator LightSee also:
Removal and Installation 1. For release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A). 2. Install the drive belt (A). Rotate the drive belt tensioner arm (A) ...
1.Open the tailgate. 2.Gently remove the center cover of the rear tailgate trim. 3.Disconnect the electrical connector. 4.Loosen the retaining nuts and remove the spoiler. 5.Remove the high mounted stop ...
Replacement • Be careful not to damage the hood and body. • When removing and installing the hood, an assistant is necessary. • When removing the clips, use a clip remover. 1. Using a screwdriver, ...
