Hyundai Santa Fe: Driver Airbag (DAB) Module and Clock Spring. Description and Operation - Airbag Module - RestraintHyundai Santa Fe: Driver Airbag (DAB) Module and Clock Spring. Description and Operation

Description

Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash occurs. The SRSCM determines deployment of the Driver Airbag (DAB).
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Driver Airbag (DAB) Module and Clock Spring. Components and Components Location
Components 1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring ...

See also:

Front Lower Arm. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...

Filter replacement
1. Open the glove box and remove the support strap (1). 2. With the glove box open, remove the stoppers on both sides. 3. Remove the climate control air filter case by pulling out both sides of the cover. ...

Roller Blind. Repair procedures
Replacement [Removal] 1. Open the roller blind using the panorama sunroof switch. • Leave 10 ~ 20cm (0.3937 ~ 0.7874 in) of the roller blind unopened. 2. Remove the roof trim. 3. Remove the roller blind ...