Hyundai Santa Fe: Front Seat Shield Outer Cover. Components and Components Location - Front Seat - Body (Interior and Exterior)Hyundai Santa Fe: Front Seat Shield Outer Cover. Components and Components Location

Component Location

1. Front seat shield outer cover



Front Seat Assembly. Repair procedures
Replacement 1. Remove the front seat track mounting cover. 2. After loosening the mounting bolts, remove the front seat assembly (A). Tightening torque : 34.3 ~ 53.9 N.m (3.5 ~ 5.5 kgf.m, 25.3 ~ 39.8 lb-ft) ...

Front Seat Shield Outer Cover. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

See also:

Inhibitor Switch. Schematic Diagrams
Circuit Diagram ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...

Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than 1 mile (1.6 km). ...