Hyundai Santa Fe: Hood Weatherstrip. Repair procedures - Hood - Body (Interior and Exterior)Hyundai Santa Fe: Hood Weatherstrip. Repair procedures

Replacement

1.
Remove the hood weatherstrip (A).
•
Be careful not to scratch the hood weatherstrip.

2.
Install in the reverse order of removal.

Hood Seal Weatherstrip. Repair procedures
Replacement 1. Detach the clips, then remove the hood seal weatherstrip (A). • Be careful not to scratch the hood seal weatherstrip. 2. Install in the reverse order of removal. • Replace any damaged ...

Hood Latch Release Handle. Components and Components Location
Component Location 1. Hood latch release handle ...

See also:

Rear Differential Carrier. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...

Sunvisor. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Smart Key. Repair procedures
Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model and then do ...