Hyundai Santa Fe: Manual climate control system
To defog inside windshield

1. Select desired temperature.
2. Select any fan speed except “0” position.
3. Select the
or
position.
4. The outside (fresh) air will be selected automatically.
If the outside (fresh) air position is not selected automatically, press the corresponding button manually.
To defrost outside windshield

1. Set the temperature to the extreme hot position.
2. Set the fan speed to the highest (extreme right) position.
3. Select the
position.
4. The outside (fresh) air will be selected automatically.
Windshield defrosting and defogging
WARNING - Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause ...
See also:
Seat Belt Warning Light
This warning light informs the driver that the seat belt is not fastened. For more details, refer to the “Seat Belts” in chapter 3. ...
Seat warmer (for rear seat)
The seat warmer is provided to warm the rear seats during cold weather. With the ignition switch in the ON position, push either of the switches to warm rear seats. During mild weather or under conditions ...
Power Door Mirror Switch. Repair
procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front left door trim. 3. Remove the power mirror switch (A) from the door trim. Installation 1. Install the power mirror switch. 2. ...

