Hyundai Santa Fe (DM): Rear Door Trim. Components and Components Location
Component Location
|
1. Rear door trim |
|
Repair procedures
Adjustment Glass Adjustment • Check the glass run channel for damage or deterioration, and replace them if necessary. 1. Remove the rear door trim. 2. Remove the rear door window glass mounting hole ...
Rear Door Trim. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
See also:
Crankshaft Position Sensor (CKPS). Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. ...
If engine stalls while driving
1. Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place. 2. Turn on your emergency flashers. 3. Try to start the engine again. If your vehicle will not start, ...
Side impact air bag
❈ The actual air bags in the vehicle may differ from the illustration. Your vehicle is equipped with a side impact air bag in each front seat. The purpose of the air bag is to provide the vehicle's ...
