Hyundai Santa Fe (TM): Special service tools - RestraintHyundai Santa Fe (TM): Special service tools

Special Service Tools
Tool(Number and Name)
Illustration
Use
Deployment tool
0957A-34100A

Airbag deployment tool.
Use with (0957A-AL140, 0957A-AL160)
Dummy
0957A-38200

Simulator to check the resistanceof each wiring harness.
Use with (0957A-AL170, 0957A-AL190)
Airbag deployment & dummy adapter kit
0957A-AL100

Use with airbag deployment and airbag inspection.
Deployment adapter
0957A-AL140

Use with deployment tool.
(0957A-34100A) (DAB, PAB, CAB, BPT)
Deployment adapter
0957A-AL160

Use with deployment tool.
(0957A-34100A) (SAB)
Dummy adapter
0957A-AL170

Use with dummy.
(0957A-38200) (DAB, PAB, CAB, BPT)
Dummy adapter
0957A-AL190

Use with dummy.
(0957A-38200) (SAB)

DAB : Driver Airbag
PAB : Passenger Airbag
SAB : Side Airbag
CAB : Curtain Airbag
KAB : Knee Airbag
BPT : Seat Belt Pretensioner
Specifications
Tightening Torques Item N.m kgf.m lb-ft Passenger Air Bag 7.8 - 11.8 0.8 - 1.2 5.8 - 8.7 Curtain airbag (CAB) bolt 7.8 - 11.8 0.8 - 1.2 5.8 - 8.7 Curtain airbag (CAB) nut 3.9 - 5.9 0.4 - 0.6 2.9 - 4.3 ...

General safety information and caution
Precautions General Precautions Please read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, or the airbags could accidentally ...

See also:

35R Clutch Control Solenoid Valve(35R/C_VFS). Specifications
Specifications Direct control VFS[35R/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14~9.81 (5.1~0.1,72.54~1.42) Current value(mA) 50~850 Internal resistance(Ω) ...

Camshaft Position Sensor (CMPS). Description and Operation
Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the piston position ...

Lift and Support Points
Lift and Support Points [Two-Post Car Lift] 1. Place the lift blocks under the support points as shown in the illustration. 2. Raise the hoist a little and visually check that the lift block is properly ...