Hyundai Santa Fe (TM): Specifications
Specification |
Items |
Inner side |
Outer side |
|
Front driveshaft |
Joint type |
HLSJ#104 |
BJ#104C |
Max. permissible angle |
23° |
45° |
|
Rear driveshaft |
Joint type |
CJ#79 |
|
Max. permissible angle |
23° |
||
Rear differential |
Oil type |
Hypoid gear oil API GL-5 SAE 75W85 (SK HCT-5 gear oil 75W85 equivalent) |
|
OIL capacity (L) |
0.58 ± 0.05 |
||
Gear type |
Hypoid |
||
Diff ratio |
2.533 |
||
Hypoid gear backlash |
0.07 - 0.15 mm (0.0028 - 0.0059 in.) |
||
Diff gear backlash |
0.01 - 0.06 mm (0 - 0.0023 in.) |
Tightening torque
Items |
N.m |
kgf.m |
lb-ft |
|
Front |
Tire wheel hub nut |
107.9 - 125.5 |
11.0 - 13.0 |
79.6 - 94.0 |
Driveshaft castle nut |
294.2 - 313.8 |
30.0 - 32.0 |
217.0 - 231.5 |
|
Strut assembly lower mounting bolt |
196.1
- 215.7 |
20.0 - 22.0 |
144.7
- 159.1 |
|
Brake caliper mounting bolt |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Wheel speed sensor mounting bolt |
8.8 - 13.7 |
0.9 - 1.4 |
6.5 - 10.1 |
|
Brake disc mounting screw |
4.9 - 5.9 |
0.5 - 0.6 |
3.6 - 4.3 |
|
Hub assembly mounting bolt |
117.7 - 137.3 |
12.0 - 14.0 |
86.8 - 101.3 |
|
Upper roll rod bracket bolt |
(A) 107.9 - 125.5 |
11.0 - 13.0 |
79.6 - 94.0 |
|
(B) 49.0 - 63.7 |
5.0 - 6.5 |
36.2 - 47.0 |
||
Lower arm ball joint mounting bolt |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Tie rod end ball joint mounting nut |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Rear |
Tire wheel hub nut |
107.9 - 125.5 |
11.0 - 13.0 |
79.6 - 94.0 |
Driveshaft castle nut |
294.2 - 313.8 |
30.0 - 32.0 |
217.0 - 231.5 |
|
Shock absorber lower mounting nut |
117.7 - 137.3 |
12.0 - 14.0 |
86.8 - 101.3 |
|
Brake caliper mounting bolt |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Wheel speed sensor mounting bolt |
8.8 - 13.7 |
0.9 - 1.4 |
6.5 - 10.1 |
|
Brake disc mounting screw |
4.9 - 5.9 |
0.5 - 0.6 |
3.6 - 4.3 |
|
Hub assembly mounting bolt |
88.3 - 107.9 |
9.0 - 11.0 |
65.1 - 79.6 |
|
Upper arm mounting bolt |
156.9 - 176.5 |
16.0 - 18.0 |
115.7 - 130.2 |
|
Lower arm mounting bolt |
156.9 - 176.5 |
16.0 - 18.0 |
115.7 - 130.2 |
|
Assist arm ball joint mounting nut |
137.2 - 156.9 |
14.0 - 16.0 |
101.2
- 115.7 |
|
Trailing arm mounting bolt |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
propeller shaft |
Front propeller shaft mounting bolt |
53.9 - 68.6 |
5.5 - 7.0 |
39.8 - 50.6 |
Propeller shaft center bearing bracket mounting bolt |
53.9 - 68.6 |
5.5 - 7.0 |
39.8 - 50.6 |
|
Rear propeller shaft mounting bolt |
53.9 - 68.6 |
5.5 - 7.0 |
39.8 - 50.6 |
|
Rear Differential |
Rear differential mounting bolt |
78.5 - 88.3 |
8.0 - 9.0 |
57.9 - 65.1 |
Differential cover mounting bolt |
39.2 - 49.0 |
4.0 - 5.0 |
28.9 - 36.2 |
|
Rear differential drain plug |
49.0 - 68.6 |
5.0 - 7.0 |
36.2 - 50.6 |
|
Rear differential filler plug |
39.2 - 58.8 |
4.0 - 6.0 |
28.9 - 43.4 |
Lubricants |
Items |
Lubricants |
Quantity |
|
Front driveshaft |
BJ 104 |
RBA |
130 (+10/0)g |
HLSJ 104 |
SH06-VX21 |
LH : 220 (+10/0)g RH : 230 (+10/0)g |
|
Rear driveshaft |
CJ 79 |
RBA |
60 (+10/0)g |
Special service tools
Special Service Tools Tool(Number and Name) Illustration Use Ball joint puller 09568-2J100 Use for removal of ball joint Lower arm ball joint remover 09568-4R100 Removal of the lower arm ball joint. Band ...
See also:
Speakers. Repair procedures
Inspection 1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws are removed and the wiring connector is connected ...
Charging System
Description and operation Description The charging system includes a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, ...
To fold down the rear center seatback
1. Lower the rear headrests to the lowest position. 2. Push the center seatback folding lever up, then fold the seat toward the front of the vehicle. When you return the seatback to its upright position, ...