Hyundai Santa Fe: Intake Manifold. Components and Components Location - Intake And Exhaust System - Engine Mechanical SystemHyundai Santa Fe: Intake Manifold. Components and Components Location

Components

1. Intake manifold assembly
2. Electronic throttle body
3. Intake manifold stay
4. Intake manifold gasket


Air Cleaner. Repair procedures
Removal and Installation 1. Remove the engine cover. 2. Remove the air duct(A). 3. Remove the battery. 4. Remove the air cleaner assembly. (1) Disconnect the breather hose (A), the intensifier hose (B). ...

Intake Manifold. Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. 3. Disconnect the intake OCV (Oil control valve) connector (A). 4. Disconnect the VIS (Variable ...

See also:

Battery Sensor. Repair procedures
Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the battery negative (-) cable after removing the bolts (B). Installation 1. Install in the ...

Hood Seal Weatherstrip. Repair procedures
Replacement 1. Detach the clips, then remove the hood seal weatherstrip (A). • Be careful not to scratch the hood seal weatherstrip. 2. Install in the reverse order of removal. • Replace any damaged ...

Transaxle Control Module (TCM). Repair procedures
Removal When replacing the TCM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used TCM] 1. Perform "TCM Neutral mode" procedure with ...