Hyundai Santa Fe: Fuel Filler Door
Engine Control Module (ECM). Repair procedures Fuel Pump Motor. Repair procedures Warning Messages
Removal Cushion Blower 1. Remove the front seat assembly. 2. Remove the cushion blower(A) after loosening the screws(4EA) and disconnecting the connector. Back Blower 1. Remove the front seat assembly. ...
Air Ventilation Seat. Repair procedures
Component Location 1. Fuel filler door open switch 2. Fuel filler door release actuator ...
Components and Components LocationSee also:
Removal When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used ECM] 1) Perform "ECM Neutral mode" procedure with ...
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Release the fixing hooks, and then remove the fuel sender (A). 4. Release ...
Shift to "P" position (for smart key system and automatic transaxle) This warning message illuminates if you try to turn off the engine without the shift lever in P (Park) position. At this time, ...
