Hyundai Santa Fe: Auto Lighting Control System
Engine Mounting. Repair procedures Components and Components Location Inhibitor Switch. Repair procedures
Troubleshooting Symptom Possible cause Remedy One lamp does not light (all exterior) Bulb burned out Replace bulb Socket, wiring or ground faulty Repair if necessary Head lamps do not light Bulb burned ...
Troubleshooting
Specifications Items Specifications Rated voltage 5V Load Max. 1mA (When head lamp lighting) Illuminations (LUX) 50 1.42 ± 0.31V 100 2.63 ± 0.58V 150 3.84 ± 0.84V ...
SpecificationsSee also:
Removal and Installation Roll road Bracket 1. Remove the roll road bracket(A). Tightening torque Bolt (B) : 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) Bolt (C) : 107.9 ~ 127.5 N.m (11.0 ~ 13.0 ...
Components 1. Airbag module 2. Bezel 3. Remote control assembly 4. Steering wheel 5. Wiring 6. Lower cover ...
Inspection • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Power Circuit Inspection 1. Disconnect the Inhibitor swtich connector. ...
